Provides peace of mind to help manage your process
Panametrics Ultrasonic In-Line Flow Meters
Process flow meters are integral to processes that contain liquids, gases or steam. Without the ability to monitor fluid flow, operators are often unable to control the throughput. Ultrasonic flow meters enable our customers to accurately measure the volume and velocity of various process liquids, whether polluted or ultra-pure.
Panametrics, a Baker Hughes business, is a leader in flare gas, steam, chilled and portable metering applications. Our portfolio offers both inline and clamp-on flow meters capable of delivering digital insights directly to your plant or for remote monitoring, using wireless adapters for HART communications. While clamp-on flow meters are an excellent portable solution, our in-line flow meters are better suited for permanent pipeline installations where accurate, reliable measurements are required.
Our broad portfolio of in-line flow meters and readily available expertise enables you to optimize your processes and meet your environmental and performance goals.
The Panametrics Ultrasonic In-Line Flow Meter Portfolio:
DigitalFlow XGF868i Explosion-Proof Transmitter
The Panametrics DigitalFlow XGF868i is a cost-effective, compact, and explosion-proof transmitter. It is able to improve the efficiency of petrochemical plants, refineries, and offshore platforms by accurately controlling the amount of steam fed to the flare tip. The DigitalFlow XGF868i enables refineries to monitor methane emissions to remain compliant with pollution and control regulation as well as reduce energy usage, making this gas flow meter the ideal choice for consent decrees. Features include:
- Measures velocity, volumetric, and mass flow
- Independent of gas composition
- Measures instantaneous average molecular weight
- High velocity range to 120 m/s (394 ft/s)
- Accurate low flow rate measurement
- 4000 to 1 turndown ratio
- One or two path configurations
- Allows cross flow immunity in large pipes
- Minimal maintenance due to no moving parts, no holes or tubes, and tolerance to dirty or wet conditions
- No pressure drop
- Field-proven installation techniques
- Easy serviceability
DigitalFlow GM868, DF868, and GS868 Flow Meters
The Panametrics DigitalFlow GM868 is a general-purpose gas flow meter designed to measure gas flow in pipes or ducts.
The meter includes wide-range transducers that block obstructions and, because of its design, eliminates pressure drop. This accurate ultrasonic meter ensures reliable gas flow that requires little or no maintenance.
The Panametrics DigitalFlow DF868 is a fixed-installed liquid flow meter designed for measuring energy and flow in all industries.
Using its own patented digital signal processing, Transit-Time, the DF868 provides drift-free measurements in ultrapure and most dirty liquids, such as fluids with gas bubbles and entrained solids.
The Panametrics DigitalFlow GS868 ultrasonic steam meter measures steam while avoiding pressure drop.
The GS868 flow meter can cover a wide range of flow rates that reduce capital and installation costs.
DigitalFlow XGM868i & XMT868i Ultrasonic Flow Meters
The Panamertics DigitalFlow XGM868i is a general-purpose gas flow meter that offers a rugged transducer, weatherproofing, and is approved for use in hazardous environments.
The XGM868i is accurate over a wide range of flows and compositions such as dirty flow streams and all gases. This gas flow meter has no pressure drop, no moving parts and is maintenance-free.
The Panametrics DigitalFlow XMT868i is an ultrasonic flow transmitter for liquids. It combines flow measurement capability with a cost-effective transmitter package that can be installed right at the process measurement point.
The XMT868i works with clamp-on or wetted installations in hazardous environments, such as petrochemical and chemical processing.
PanaFlow Z1G, Z2G & Z3 In-Line Ultrasonic Flow Meters
The PanaFlow ultrasonic flow meter systems are high-performance, affordable solutions for a variety of gas and liquid flow applications.
The Z1G provides a one-path configuration gas flow meter, while the Z2G is a two-path gas flow meter. Both offer a broad range that is accurate and reliable, and available in robust, sleek designs.
The PanaFlow Z3 by Panametrics is a three-path wetted meter designed specifically for dependable, accurate, and repeatable flow measurement of process liquids. With a sleek industrial design and ultra-reliable electronics, it provides a top-of-the-line choice for process and industrial applications.
The Z3 brings together Panametrics ultrasonic flow meter expertise with the advantages of ultrasonics for a high-performance, low-cost-of-ownership measurement solution for process liquids. Unlike other flow technologies, the ultrasonic PanaFlow Z3 does not require maintenance since it does not have any obstruction in the flow path or any moving parts to be damaged by flowing liquid. It is not affected by changing process conditions (temperature, pressure, and conductivity) and so does not drift over time, eliminating the requirement for periodic calibration.
The PanaFlow XMT1000 is an ultrasonic flow transmitter for liquids that can be installed right at the process measurement point, providing users with accurate and reliable flow measurement.
The XMT1000 is certified for hazardous installations, such as petrochemical and chemical processing, and supports multiple paths for more accurate measurement. Applications include:
- Hydrocarbon liquids
- Crude oil
- Lubricating oil
- Diesel fuel oil
- Liquefied natural gas (LNG)
- Water and wastewater
- Distilled water
- Hot/chilled water
PanaFlow HT SIL
The PanaFlow HT is a SIL-rated flow meter that offers the ability to take accurate measurements at the bottom of a refinery.
The PanaFlow HT is ideal for delayed coker units, fluidic catalytic cracking, vacuum distillation, crackers, hydrotreaters, visbreakers, crude oil, and LNG, and is rated for hazardous areas and extreme processes with temperatures from -200C to 600C. Features include:
- No drifting flow measurement
- No periodic calibration required
- No maintenance
- No restriction in the pipe
- Reliable measurement by design— (IEC61508 certification pending)
- Flow measurement in extremely high-process temperature (600°C/1112°F) applications
- Flow measurement in extremely low-process temperature (-200°C/-328°F) applications
- Bi-directional measurement
The PanaFlow LZ is a complete ultrasonic flow meter system for liquid applications, leveraging the state-of-the-art XMT1000 electronics platform. Features include:
- 0.5% accuracy
- Field replaceable BWT and WT sensors
- Hydrocarbon liquids
- Crude oils
- Internal allocation metering
- Pipeline metering
- Fuel oils
- Water/cooling water/wastewater
- Weak acid solutions
Watch Our PanaFlow Ultrasonic Flow Measurement Use Case Video:
Our Ultrasonic Process Flow Meters offer these features and benefits
A liquid and gas meter focused on providing best-in-class performance with minimal operational costs. This technology offers optimal lifecycle cost, process control, monitoring and SIL applications.
This reliable and accurate advanced meter technology can measure any type of gas or steam and works well in volatile environments, such as chemical and hydrocarbon processing.
Offers the perfect solution for a broad range of process liquid flow applications, including water and wastewater, industrial, HVAC, hydroelectric, agriculture, food & beverage and pharmaceutical. The rugged AquaTrans line requires no maintenance or calibration.
The Portable TransPort
The Portable TransPort
Good for spot-checking scenarios. Can save time and cost for quick pipe installation, and can generate accurate and independent flow measurements to validate a permanent flow meter.
Discover next generation solutions for minimal risk and maximum performance
Panametrics’ experience and solutions in water and wastewater
Measure liquid flow Non-Intrusively and Non-Invasively
Panametrics’ experience and solutions in Steel Industry